Author Guidelines

How to prepare and submit a manuscript to IRIS.

Use the IRIS manuscript template. Manuscripts that do not follow the template or these guidelines are returned to the authors before review.

Before You Submit

By submitting, the corresponding author confirms on behalf of all authors that:

  • The manuscript is original, has not been published before (except as a preprint or thesis), and is not under consideration by another journal.
  • The topic fits the Focus and Scope.
  • Overall similarity is below 20%, with no more than 3% from any single source (Plagiarism Policy).
  • All authors meet the authorship criteria and have approved the submission and the author order.
  • Every author has an ORCID iD, entered in the submission form with a full affiliation and country.
  • Research involving human participants, personal data, or animals has the required consent and ethical approval.
  • Any use of generative AI is disclosed under the Generative AI Policy.

Article Types

Type Length and requirements
Original research article 5,000–8,000 words including references; at least 25 references.
Systematic review Same length range; follows PRISMA 2020 or an equivalent protocol; typically at least 50 references.

Manuscript Structure

Research articles follow the structure below. Reviews may replace Method and Results with the review protocol and synthesis.

Section Content
Title Concise, specific, and informative; at most 20 words; no abbreviations except widely known ones.
Authors and affiliations Full names (no titles), department, institution, city, and country, email, and ORCID iD for every author; mark the corresponding author. Normally at most 6 authors; more must be justified. Remove this information from the anonymized file for review.
Abstract 150–250 words in one paragraph and in English: purpose, method, main results with key numbers, and contribution or implications. No citations or undefined abbreviations. The abstract must be understandable on its own because it is what indexing services and most readers see.
Keywords Four to six keywords or phrases, in alphabetical order, that are not all repeated from the title.
1. Introduction Background, the specific problem, a critical summary of recent related work, the research gap, and a clear statement of the objective, research questions or hypotheses, and contributions. Close with the structure of the article.
2. Literature review / theoretical framework Critical synthesis of relevant, recent studies (not a list of summaries) and, where applicable, the theoretical basis and hypotheses. May be merged into the Introduction.
3. Method Enough detail for another researcher to reproduce or audit the study (see Methods and Reporting below).
4. Results Findings presented logically with tables and figures; do not repeat the same data in a table and a figure.
5. Discussion Interpretation of the results, comparison with previous studies, explanation of unexpected findings, theoretical and practical implications, and limitations. May be combined with Results.
6. Conclusion Answers to the research questions, the main contribution, limitations, and specific directions for future research. No new results and no citations.
Declarations Author contributions, funding, conflict of interest, data availability, ethics approval where relevant, and use of generative AI (see below).
Acknowledgments Optional: people or institutions that helped but do not qualify as authors.
References IEEE style (see References below).
Appendices Optional: questionnaires, proofs, or additional results that support but are not essential to the main text.

Methods and Reporting

Reviewers for IRIS pay particular attention to the following points:

  • Describe every dataset: source and licence, size, class distribution, train/validation/test split, and preprocessing.
  • Compare the proposed method with recent, relevant baselines (preferably from the last three years) under the same protocol.
  • Justify the evaluation metrics; for classification report precision, recall, F1-score, and the confusion matrix, not accuracy alone.
  • Report the mean and standard deviation over repeated runs or cross-validation, and test whether differences are statistically significant.
  • State the hardware, software versions, hyperparameters, and random seeds needed to reproduce the results; include an ablation study where components are proposed.
  • For system or application papers, evaluate the system (performance, usability, or user study) rather than only describing it.

Please follow the relevant reporting guideline: PRISMA 2020 for systematic reviews and meta-analyses.

Formatting

  • File: Microsoft Word (.docx) prepared with the IRIS template; LaTeX users may contact the editor.
  • Language: clear academic English, checked by a proficient speaker or professional editing service before submission. Manuscripts with language problems that obscure the meaning are returned before review.
  • Headings: numbered, at most three levels (1., 1.1., 1.1.1.).
  • Tables: editable (not images), numbered, with a title above; explain abbreviations in a note below.
  • Figures: at least 300 dpi, readable when printed in grayscale, numbered, with a caption below; cite the source of any figure not created by the authors and obtain permission where needed.
  • Equations: created with the Word equation editor, numbered on the right, and every symbol defined.
  • Units and numbers: SI units; a period as the decimal separator; define abbreviations at first use.
  • Footnotes: avoid; integrate the information into the text.

References

  • Use IEEE style and a reference manager (Mendeley, Zotero, or EndNote).
  • At least 25 references for research articles, of which at least 80% are journal articles or peer-reviewed proceedings from the last ten years.
  • Every reference is cited in the text and every citation appears in the reference list.
  • Include the DOI of every reference that has one.
  • Cite the original source, not a secondary one; avoid predatory journals, unpublished theses, and non-scholarly websites.
  • Self-citation should be limited to what is genuinely relevant.
  • References must be written in Latin script. For a work not in English, give the original title transliterated, followed by an English translation in square brackets, and indicate the language.

Cite references in the text with numbers in square brackets, for example [1] or [2]–[4], numbered in order of first appearance.

Type IEEE example
Journal article [1] A. B. Author and C. D. Author, "Title of the article," Abbrev. Journal Title, vol. 12, no. 3, pp. 45–56, Mar. 2024, doi: 10.xxxx/xxxxx.
Conference paper [2] E. F. Author, "Title of the paper," in Proc. Abbrev. Conf. Name, City, Country, 2023, pp. 101–108, doi: 10.xxxx/xxxxx.
Book [3] G. H. Author, Title of the Book, 2nd ed. City, Country: Publisher, 2022.
Dataset or software [4] I. J. Author, "Name of dataset or software," version 1.2, Zenodo, 2024. doi: 10.5281/zenodo.xxxxxxx.
Website [5] Organization, "Title of the page." Accessed: Jan. 15, 2025. [Online]. Available: https://...

Required Declarations

Place these statements before the references. Use the wording below as a model.

Author contributions Describe each author's role with the CRediT taxonomy, for example: A.B.: conceptualization, methodology, writing – original draft. C.D.: data curation, formal analysis, writing – review and editing.
Funding This research was funded by [funder], grant number [xxx]. or This research received no external funding.
Conflict of interest The authors declare no conflict of interest. or a description of any interest (policy).
Data availability The data and code that support the findings are available at [repository, DOI]. or the reason they cannot be shared (policy).
Ethics approval For research with human participants: the approving committee and approval number, and a statement that informed consent was obtained.
Generative AI use During the preparation of this work the authors used [tool] to [purpose]. After using this tool, the authors reviewed and edited the content and take full responsibility for the publication.

How to Submit

  1. Register or log in on this website and choose Make a Submission.
  2. Upload the anonymized manuscript (without author names, affiliations, acknowledgments, or identifying file properties).
  3. Upload a separate title page with full author information and the declarations.
  4. Enter the metadata exactly as in the manuscript: title, abstract, keywords, and every author with affiliation, country, and ORCID iD. This metadata is what indexing services receive.
  5. Optionally upload a cover letter explaining the contribution and suggesting two to three potential reviewers without conflicts of interest.
  6. Confirm the submission checklist and the copyright terms, then submit.

After Submission

1

Screening

Scope, template, declarations, and similarity check (about one week).

2

Peer review

Double-blind, at least two reviewers; first decision in about 4-6 weeks.

3

Revision

Revised manuscript with a point-by-point response within 2 weeks (minor) or 4 weeks (major).

4

Acceptance

Final decision by the editor; license agreement.

5

Production

Copyediting, layout, author proof check within three days, DOI, and online publication.

Accepted articles show the submission, acceptance, and publication dates. Track progress in the journal system; questions go to [iris@resincen.org] with the submission ID.

Make a SubmissionDownload Template

Informatics Research Scientific (IRIS) · Last updated: 2026